NanoPi NEO Core-LTS

In Stock

18,00 HT

Comparer

The NanoPi NEO Core(abbreviated as “NEO Core”) is an alternative NanoPi NEO that works like a CPU board with male pin-headers. It has the same form factor as the NanoPi NEO and same pin descriptions. The connectors and ports are populated to pin-headers on the NEO Core. The NanoPi NEO Core has ESD protection for its MicroUSB port and TF card slot. In addition the NEO Core can have an optional onboard eMMC flash which is preferred by industrial customers.
The NEO Core uses a popular Allwinner H3 SoC and has onboard 256M/512M DDR3 RAM. FriendlyElec offers models with three eMMC options: 8GB/16GB/32GB and one that doesn’t have eMMC at all.
FriendlyElec migrated UbuntuCore with mainline kernel 4.11 for it.

Qty

Diagram, Layout and Dimension

GPIO Pin Spec

Pin# Name Linux gpio Pin# Name Linux gpio
1 SYS_3.3V 2 VDD_5V
3 I2C0_SDA / GPIOA12 4 VDD_5V
5 I2C0_SCL / GPIOA11 6 GND
7 GPIOG11 203 8 UART1_TX / GPIOG6 198
9 GND 10 UART1_RX / GPIOG7 199
11 UART2_TX / GPIOA0 0 12 GPIOA6 6
13 UART2_RTS / GPIOA2 2 14 GND
15 UART2_CTS / GPIOA3 3 16 UART1_RTS / GPIOG8 200
17 SYS_3.3V 18 UART1_CTS / GPIOG9 201
19 SPI0_MOSI / GPIOC0 64 20 GND
21 SPI0_MISO / GPIOC1 65 22 UART2_RX / GPIOA1 1
23 SPI0_CLK / GPIOC2 66 24 SPI0_CS / GPIOC3 67

GPIO2 Pin Description

Pin# Name Linux gpio Pin# Name Linux gpio
1 VDD_5V 2 SPI1_MOSI / GPIOA15 15
3 USB-DP1 4 SPI1_MISO / GPIOA16 16
5 USB-DM1 6 SPI1_CLK / GPIOA14 14
7 USB-DP2 8 SPI1_CS / GPIOA13 13
9 USB-DM2 10 MICIN1P
11 GPIOL11/IR-RX 363 12 MICIN1N
13 SPDIF-OUT/GPIOA17 17 14 LINEOUTR
15 PCM0_SYNC/I2S0_LRCK/I2C1_SCL 16 LINEOUTL
17 PCM0_CLK/I2S0_BCK/I2C1_SDA 18 UART_RXD0 / GPIOA5 / PWM0 5
19 PCM0_DOUT/I2S0_SDOUT 20 UART_TXD0 / GPIOA4 4
21 PCM0_DIN/I2S0_SDIN 22 VDD_5V
23 GND 24 GND

GPIO3 Pin Description

Pin# Name Linux gpio Pin# Name Linux gpio
1 EPHY-LINK-LED 2 EPHY-SPD-LED
3 EPHY-TXP 4 EPHY-TXN
5 EPHY-RXP 6 EPHY-RXN
7 NC 8 NC
9 NC 10 NC
11 GND 12 GND
13 USB-DP3 14 GPIOA7 7
15 USB-DM3 16 I2C2_SCL / GPIOE12
17 5V 18 I2C2_SDA / GPIOE13
19 5V 20 SYS_3.3V

Note:

  1. SYS_3.3V: 3.3V power output
  2. VVDD_5V: 5V power input/output. When the external device’s power is greater than the MicroUSB’s the external device is charging the board otherwise the board powers the external device. The input range is 4.7V ~ 5.6V
  3. All pins are 3.3V, output current is 5mA
CPU

Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz

DDR3 RAM

256MB/512MB DDR3 RAM

Connectivity

0/100M Ethernet(6Pin, included in 2.54mm pitch pin header)

Storage

NC/8GB/16GB/32GB eMMC

USB Host

3(included in 2.54mm pitch pin header)

Audio input/output Port

4Pin, included in 2.54mm pitch pin header

Debug Serial Port/UART0

4Pin, included in 2.54mm pitch pin header

microSD Slot

1

microUSB

OTG and power input

GPIO

It includes UART, SPI, I2C, IO etc

PCB Dimension

40 x 40mm

Power

DC 5V/2A

Working temperature

-40℃ to 80℃

OS

U-boot,Ubuntu-Core

Reviews

There are no reviews yet.

Be the first to review “NanoPi NEO Core-LTS”

Your email address will not be published. Required fields are marked *

Top