NanoPi K1 Plus

In Stock

35,00 HT

Comparer

The NanoPi K1 Plus uses the Allwinner 64-bit quad-core Cortex™-A53 H5 SoC. It can run either a 64-bit OS or a 32-bit OS. It has NEON multi-media engine and a hex-core Mali450 GPU. It supports various video formats and has strong HD encoding/decoding capabilities.

The NanoPi K1 Plus has 2GB DDR3 RAM, onboard WiFi, DVP camera interface, Gbps Ethernet, USB, HDMI, infrared remote control, 3.5mm audio jack, I2S and etc. It can boot from a TF card and supports an external eMMC module.

The NanoPi K1 Plus has the same dimension as RPi 3. Its 40-Pin GPIO pin-header is compatible with RPi 3’s GPIO pin-header. It works with any RPi housing.

A Ubuntu Core image and an Armbian image are ready for the NanoPi K1 Plus.

Qty

Diagram, Layout and Dimension

Layout

NanoPi-K1-Plus Interface Layout

  • GPIO Pin Spec
Pin# Name Linux gpio Pin# Name Linux gpio
1 SYS_3.3V 2 VDD_5V
3 I2C0_SDA / GPIOA12 4 VDD_5V
5 I2C0_SCL / GPIOA11 6 GND
7 GPIOG11 203 8 UART1_TX / GPIOG6 198
9 GND 10 UART1_RX / GPIOG7 199
11 UART2_TX / GPIOA0 0 12 GPIOA6 6
13 UART2_RTS / GPIOA2 2 14 GND
15 UART2_CTS / GPIOA3 3 16 UART1_RTS / GPIOG8 200
17 SYS_3.3V 18 UART1_CTS / GPIOG9 201
19 SPI0_MOSI / GPIOC0 64 20 GND
21 SPI0_MISO / GPIOC1 65 22 UART2_RX / GPIOA1 1
23 SPI0_CLK / GPIOC2 66 24 SPI0_CS / GPIOC3 67
25 GND 26 SPDIF-OUT / GPIOA17 17
27 I2C1_SDA / GPIOA19 / PCM0_CLK / I2S0_BCK 19 28 I2C1_SCL / GPIOA18 / PCM0_SYNC / I2S0_LRCK 18
29 GPIOA20 / PCM0_DOUT / I2S0_SDOUT 20 30 GND
31 GPIOA21 / PCM0_DIN/ I2S0_SDIN 21 32 GPIOA7 7
33 GPIOA8 8 34 GND
35 UART3_CTS / SPI1_MISO / GPIOA16 16 36 UART3_TX / SPI1_CS / GPIOA13 13
37 GPIOA9 9 38 UART3_RTS / SPI1_MOSI / GPIOA15 15
39 GND 40 UART3_RX / SPI1_CLK / GPIOA14 14
  • eMMC Connector Pin Spec
Pin# Name Pin# Name
1 eMMC_D0 2 eMMC_D1
3 eMMC_D2 4 eMMC_D3
5 eMMC_D4 6 eMMC_D5
7 eMMC_D6 8 eMMC_D7
9 eMMC_DS 10 GND
11 eMMC_CMD 12 eMMC_CLK
13 NC 14 GND
15 NC 16 1.8V OUT
17 eMMC_RST 18 3.3V OUT
19 GPIOY_5 20 GND
  • Debug Port(UART0)
Pin# Name
1 GND
2 VDD_5V
3 UART_TX
4 UART_RX
  • 7Pin I2S Pin Spec
Pin# Name
1 GND
2 SYS_3.3V
3 I2S0_BCK
4 I2S0_LRCK
5 I2S0_SDOUT
6 I2S0_SDIN
7 I2S_MCLK
Notes

  1. SYS_3.3V: 3.3V power output
  2. VDD_5V: 5V power input/output. Input power range: 4.7~5.6V
  3. All signal pins are 3.3V

Board Dimension

NanoPi_K1_Plus_V1.0_1712 Dimensions

 

Get Started

Essentials You Need

Before starting to use your NanoPi K1 Plus get the following items ready

  • NanoPi K1 Plus
  • MicroSD/TF Card: Class 10 or Above, minimum 8GB SDHC
  • A DC 5V/2A power cord with MicroUSB port is a must
  • HDMI monitor
  • USB keyboard, mouse and possible a USB hub(or a TTL to serial board)
  • A host computer running Ubuntu 16.04 64 bit system
CPU

Allwinner H5, Quad-core 64-bit high-performance Cortex A53

DDR3 RAM

512MB/1GB

Connectivity

10/100/1000M Ethernet utilizing RTL8211E-VB-CG

Storage

8GB/16GB/32GB eMMC

USB Host

3(included in 2.54mm pitch pin header)

microSD Slot

1

microUSB

OTG and power input

GPIO1

2.54mm pitch 12 x 2 pin header containing UART, SPI, I2C, GPIO and etc

GPIO2

2.54mm pitch 24 pin header containing SPI, IR, I2S, USB, serial debug port, audio and etc

GPIO3

2.54mm pitch 20 pin header containing USB, Gbps Ethernet, I2C and etc

LED

2, one for power status and the other for system status

PCB Dimension

40 x 40mm

OS

u-boot,Ubuntu Core

Reviews

There are no reviews yet.

Be the first to review “NanoPi K1 Plus”

Your email address will not be published. Required fields are marked *

Top